Ideal for perforated and solid brick, stone, wood, jamb, flooring, decorative products, drywall, plywood, EPS/XPS, rock wool and block construction applications. Adheres to all construction materials except silicone, teflon, polyethylene and polypropylene.
- Shake the can strongly for up to 30 seconds.
- Screw the gun or straw onto the can.
- Remove any dirt, oil and dust from the application surface and moisten it with water (moistening the surface and applied foam is important for accelerating the reaction and achieving an efficient result).
- Use the can upside down.
- Press the trigger of the gun or straw to release the foam.
- Apply 2-3 cm wide horizontal and vertical beads onto the surface to be bonded.
- Wait 1 minute after application, then join the materials.
- Clean the gun and valve thoroughly after use for future applications.
- Any uncured foam residues should be cleaned with SOMAFIX FOAM &GUN CLEANER.
- Since the applied foam will expand, controlled volume should be used.
| Chemical Basis |
Polyurethane Prepolymer |
| Curing System |
Moisture |
| Skin Forming Time |
3 min |
| Open Time |
3-5 min |
| Cutting Time |
5-10 min |
| Density |
15-18 kg/m3 |
| Thermal Resistance |
-40ºC to +100ºC |
| Yield |
2-3cm Width 40-45 m |
| Application Temperature |
0ºC / +35ºC |
| Storage Temperature |
0ºC / +30ºC |
| Ideal Can Temperature |
+20ºC |
| Shelf life |
15 months |