Used for fixing doors, windows and similar panels, insulating hot and cold water pipes and electrical installations, and filling gaps, holes and cracks. Bonds to any kinds of building materials except silicone, teflon, PE and PP.
- Shake the can strongly for up to 30 seconds.
- Install the can to the gun by turning it.
- Remove any dirt, dust and grease from the application surface and moisten it with water. (Moistening the substrate and the applied foam is especially important for accelerating the reaction and achieving efficient results.)
- Use the can upside down.
- Press the trigger of the gun to allow the foam to come out.
- Adjust the foam output speed and volume using the valve at the back of the gun.
- For subsequent uses, the gun and valve must be cleaned from foam residue.
- Clean any foam on the gun and surrounding areas before curing with SOMAFIX FOAM CLEANER.
- Since the applied foam will expand, controlled volume should be used.
| Chemical Basis |
Polyurethane Prepolymer |
| Curing System |
Moisture |
| Skin Forming Time |
3-5 min |
| Cutting Time |
10 min |
| Density |
17-20 kg/m3 |
| Thermal Resistance |
-40ºC to +100ºC |
| Yield |
70 lt |
| Application Temperature |
0ºC / +35ºC |
| Storage Temperature |
0ºC / +30ºC |
| Ideal Can Temperature |
+20ºC |
| Shelf life |
18 months |